Buy the STL files
Pay with paypal, will send you the files in email. See printing notes below.
3D Printing notes
Use whatever material you prefer. PLA is just fine. On standard settings (2 wall layers)Â my printer takes 5 hours for the larger piece (per side) and 30 minutes for the smaller piece (per side). So if you don't have a 3D printer it is time to get one :)
If you are unfamiliar with 3D printing: You will use a software for your printer (most likely ultimaker) into which you load the STL file. The software will generate the file necessary for your printer.
The forks' inner tubes are exposed. Even a small piece of stone can damage those tubes and cause oil-seal damage, the fork to leak oil. Your trip ruined and the repair costs are eye watering.
Shipping to Europe only
WHITE - You may paint it yourself
I used simple black spray paint for metal (from LIDL) and the yellow is dupli-color platinum traffic yellow RAL 1023
PLA plastic
Layers of 3D printing are visible (printing quality 0.28mm). If you don't like the layers showing, you can sand it with simple sanding paper.
Final version has only 4 holes on the main part which is enough (not as on photo above).
Shipping by GLS mostly (EUR 20 to Germany)